PL-1530 technical specification
Plasma cutting machine SPR 1500×3000
- Welded frame table, working field 1600 × 3100 mm, 3-axis control (X, Y, Z)
- Machine dimensions L/W/H
- 3700 × 2200 × 1400 mm
- Weight
- 400 kg
- Torch positioning accuracy
- 0.1 mm/metre
- Automatic torch height control (THC)
- Automatic plate sensing
- Backlash compensation
- Heavy-duty shielded cables
- Robust cylindrical guides
- 16 mm
- Maximum cumulative rack error
- 0.1 mm/m
- Motor types: Z axis
- stepper; X1, X2, Y: servo-steppers
- Maximum traverse speed 25,000 mm/min
- Fully equipped CNC unit based on an industrial PC with Mach3 and SheetCam. Post-processors include Isel, HPGL, Mach2, TurboCNC and WinCNC (reads all vector formats); 19-inch monitor; 220 V supply
- CNC system power consumption
- 1 kW
- Z-axis travel
- 100 mm
Plasma cutting power source Arctherm 100 with automatic torch TP-105, 7.5 m hose package
- Rated supply voltage
- 380 V ±15%
- Current adjustment range
- 20–105 A
- Max. cut thickness, edge start
- 32 mm
- Max. cut thickness, pierce: 20 mm
- Rated power consumption
- 20 kW
- Duty cycle
- 60%
- Ambient temperature range −40…+40 °C
- Air consumption
- 360 l/min
Air treatment system SMC Pneumatic IDFA series (Japan) + main line filter
- Inlet air pressure (MPa)
- 0.05–1.0; inlet air temperature 5–50 °C; ambient temperature 2–40 °C (relative humidity up to 85%)
- Supply voltage
- 230 V ±10%, 50 Hz
- Power consumption (W)
- 180
- Refrigerant
- R134a (HFC)
- Flow capacity
- At dew point +3 °C: 400 Nl/min; at +10 °C: 560 Nl/min
Dimensions and equipment
- Table
- single-section, with fume extraction
- Gantry
- integrated with the table
- Gas (oxy-fuel) torch
- optional
Other PL series models
If the working area is not enough or you need a margin, compare with the neighbouring models.
- PL-1515Working area: 1600 × 1600 × 100 mmOpen PL-1515
- PL-2060Working area: 2000 × 6000 × 200 mmOpen PL-2060
Request for PL-1530
Describe your task — a YZSE engineer will check whether PL-1530 suits it and suggest another model if needed.
Requests go to the sales department; an engineer handles the technical part. We reply by e-mail or phone. We can correspond in English.
What to include
- Model you are considering: PL-1530
- Material and thickness
- Largest workpiece or sheet size
- Quantity and workload
- Drawing or photo of the part, if available
An e-mail to sale.yar-power@mail.ru opens with the questions above.