PL-2060 technical specification
Plasma cutting machine SPR 2500×7000, split design (without table)
- Gantry on posts, 7 m long (the gantry travels beyond the table into a service zone), 2.5 m wide, 3-axis control (X, Y, Z)
- Automatic torch height control (THC)
- Automatic plate sensing
- Backlash compensation
- Automatic diagonal alignment
- Heavy-duty shielded cables
- Robust profile guides
- X axis 25 mm, Y axis 15 mm
- Maximum cumulative rack error
- 0.1 mm/m
- Hub-mounted pinion
- Motor types: Z axis
- stepper; X1, X2, Y: servo-steppers with encoder
- Maximum traverse speed 25,000 mm/min
- Positioning accuracy
- 0.1 mm/m
- Fully equipped CNC unit based on an industrial PC with software, Mach3, SheetCam. Post-processors include Isel, HPGL, Mach2, TurboCNC and WinCNC (reads all vector formats); 19-inch monitor; 220 V supply
- CNC system power consumption
- 1 kW
- Z-axis travel
- 200 mm
Sectional downdraft table 2000 × 6000 mm + exhaust fan VR 280-46-4.0
- Six-section extraction system
- Pneumatic cylinders
- Easy removal of parts and accumulated slag
- Maximum permissible load 1170 kg/m² (plate up to 150 mm)
- Fan capacity 4000 m³/h, 380 V supply
Plasma cutting power source Arctherm 100 with automatic torch TP-105, 7.5 m hose package
- Rated supply voltage
- 380 V ±15%
- Current adjustment range
- 20–105 A
- Max. cut thickness, edge start
- 32 mm
- Max. cut thickness, pierce: 20 mm
- Rated power consumption
- 20 kW
- Duty cycle
- 60%
- Ambient temperature range −40…+40 °C
- Air consumption
- 360 l/min
Gas (oxy-fuel) torch (optional)
- Gas torch
- Torch height adjustment (without automatic control)
- Cutting oxygen solenoid valve
Air treatment system SMC Pneumatic IDFA series (Japan) + main line filter
- Inlet air pressure (MPa)
- 0.05–1.0; inlet air temperature 5–50 °C; ambient temperature 2–40 °C (relative humidity up to 85%)
- Supply voltage
- 230 V ±10%, 50 Hz
- Power consumption (W)
- 180
- Refrigerant
- R134a (HFC)
- Flow capacity
- At dew point +3 °C: 400 Nl/min; at +10 °C: 560 Nl/min
Compressor
- Mains voltage 380 V
- Mains frequency 50 Hz
- Capacity at least 600 l/min
- Receiver volume at least 270 l
- Weight up to 200 kg
- Main line filter rating 5 µm or finer
Dimensions and equipment
- Machine dimensions
- 7400 × 3000 × 1600 mm
- Machine weight
- 3000 kg
- Gas (oxy-fuel) torch
- optional
Other PL series models
If the working area is not enough or you need a margin, compare with the neighbouring models.
- PL-1515Working area: 1600 × 1600 × 100 mmOpen PL-1515
- PL-1530Working area: 1600 × 3100 × 100 mmOpen PL-1530
Request for PL-2060
Describe your task — a YZSE engineer will check whether PL-2060 suits it and suggest another model if needed.
Requests go to the sales department; an engineer handles the technical part. We reply by e-mail or phone. We can correspond in English.
What to include
- Model you are considering: PL-2060
- Material and thickness
- Largest workpiece or sheet size
- Quantity and workload
- Drawing or photo of the part, if available
An e-mail to sale.yar-power@mail.ru opens with the questions above.