FD series

CNC router for wood and plastics FD-2015

FD-2015 technical specification

Working area: At least 2000 × 1500 × 200 mm.
Drive type, all three axes: X and Y axes: precision ball screw 2005; Z axis: precision ball screw 1204 (accuracy class C5)
Linear guides: All three axes X, Y, Z: precision square profile rails HG20
Positioning accuracy: 0.03–0.05 mm
Maximum rapid traverse speed: 6,000 mm/min.
Acceleration: Up to 1.5 m/s².
Table surface: aluminium profile with T-slots for hold-down clamps.
Workpiece clamping: T-slots.
Motion system, all three axes: Servo drive 600 W, 220 V, frame size 60
Supply voltage: 220 V, single phase, 50 Hz (optionally 380 V, 3 phases on request).
Spindle power: 2.2 kW, industrial, ER20 collet chuck (speed up to 24,000 rpm).
Spindle cooling: Liquid (water) cooling in a closed loop.
Starter cutter set included: Cutters for plywood (corn-cob type), compression cutters (clean cut), tapered cutters for 3D wood engraving, a set of precision ER20 collets.
Maximum table load: 250 kg, with height-adjustable feet.
Protection and dust extraction: Spindle guard with a dense nylon brush for a chip extraction system.
Control module: Professional control system with gantry squaring and inputs for limit sensors. Limit sensors are included in the delivery.
Machine weight: 600 kg

If the working area is not enough or you need a margin, compare with the neighbouring models.

Describe your task — a YZSE engineer will check whether FD-2015 suits it and suggest another model if needed.

Requests go to the sales department; an engineer handles the technical part. We reply by e-mail or phone. We can correspond in English.

An e-mail to sale.yar-power@mail.ru opens with the questions above.